I’m not sure if this is related to Night Light (which I don’t have enabled) or even just the monitors dimming in power settings, but I constantly have to go and bring my brightness back up from 20% when I sit down at my computer in the AM.

I have disabled Sleep as well, and the only thing left is the regular Energy Saving features of dimming after X minutes and Turn Off Monitors after X minutes, but I’ve set both of those to short timeouts and when it comes back, it’s at 100%.

Edit: For some reason I was on X11. I’ve switched to Wayland and will see if that changes anything.

Any ideas what’s causing this?

  • Hellmo_luciferrari@lemm.ee
    link
    fedilink
    English
    arrow-up
    6
    ·
    2 months ago

    I’m having similar. When machine dims the display, it’s changing my monitors brightness and doesn’t bounce back.

    • ikidd@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      I just realized I was on X11 when I checked logs. I’m going to try it on Wayland (which is what I normally use) and see if it continues.

      What I did notice is that changing my Dim settings to 1 minute and letting it take effect to test did not seem to make it happen. It seems like it takes longer, like overnight.

    • xinayder@infosec.pub
      link
      fedilink
      arrow-up
      1
      ·
      2 months ago

      I realized it happened with me whenever my computer was idle for a few minutes and the monitor turned off. Eventually it fixed itself, but it sure was annoying having to change the brightness back to the value it was before it went on stand-by.

  • Kevin@lemm.ee
    link
    fedilink
    English
    arrow-up
    5
    ·
    2 months ago

    Here are the settings I used to stop this from happening.

  • DarkThoughts@fedia.io
    link
    fedilink
    arrow-up
    1
    ·
    2 months ago

    I disabled the dimming because often it would not return it back to 100% for some reason. Dunno. One of those KDE things.

    • ikidd@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 months ago

      What confuses me is that the dimming is set to 70%, not the 20% it comes back at. And only if I leave it overnight or something, not if I just set the timer to 1 minute and test it.

      • DarkThoughts@fedia.io
        link
        fedilink
        arrow-up
        1
        ·
        2 months ago

        I think mine went to 70% or something, even though I had it set to 100%. I don’t know for sure though, because the weird thing was that the slider in the tray icon was still at 100%. So I had to “reduce” the brightness and then max it out again to reach proper 100%.