I recently installed debian 12 using debian-12.2.0-arm64-netinst.iso. It is the only OS installed and I used the whole 500GB disk.

I selected something like guided partitioning with separate /home/ using LVM and encryption. Now that I am using my system a bit, I realize that I don’t think it ever asked me how big to make the / partition and it is very small. Only 27GB.

Will this be a problem?

Or, is the LVM going to allow the partition to be resized or otherwise take up as much of the space as it requires?

# lsblk
NAME                    MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINTS
sda                       8:0    0 476.9G  0 disk  
├─sda1                    8:1    0   512M  0 part  /boot/efi
├─sda2                    8:2    0   488M  0 part  /boot
└─sda3                    8:3    0   476G  0 part  
  └─sda3_crypt          253:0    0 475.9G  0 crypt 
    ├─mycomputer--vg-root     253:1    0  27.9G  0 lvm   /
    ├─mycomputer--vg-swap_1   253:2    0   976M  0 lvm   [SWAP]
    └─mycomputer--vg-home     253:3    0   447G  0 lvm   /home

I tried booting into a live usb to resize the partition using gparted but I couldn’t seem to do so.

If I need to reinstall and change something I’d rather do it now than later.

  • suprjami@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    10
    ·
    8 months ago

    It’s fine. I give my systems a 20G or 30G root file system.

    If you use Flatpak then make sure you do user installs. If you add the remote as a user remote then all installs are user installs.

    If you use VMs then create a storage pool for the disks in your home filesystem. I create a /home/libvirt/ for this.

    Basically just be mindful not to fill your root filesystem.

    • mhz@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      Would you please explain (then all installs are user install). I dont use flatpack, but the last time I used it (on Tumbleweed) I remember it downloaded its applications/runtime stuff to /var/lib/flatpak then installing them to ~/.local/share/flatpak in the home folder of every user who runs those flatpak applications.

      • suprjami@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        11
        ·
        8 months ago

        You added the Flatpak repo as a “system” repo with:

        flatpak remote-add flathub https://dl.flathub.org/repo/flathub.flatpakrepo
        

        As such, the downloaded applications are stored by the system in /var like you said.

        If you run installs as user installs, eg:

        flatpak --user install com.example.appname
        

        Then the application is stored in your home directory, not in /var.

        You can also add the Flatpak repo as a “user” repo, eg:

        flatpak --user remote-add flathub https://dl.flathub.org/repo/flathub.flatpakrepo
        

        Now all installs will behave as if you passed --user to the install command. All installs will go to your home directory, none will go to /var

  • mhz@lemm.ee
    link
    fedilink
    arrow-up
    4
    ·
    8 months ago

    LVM gives you the ability to downsize and resize without having to worry about partitions boundaries. So, if you find yourself in need for storage you can downsize the home partition and grow the root.

    That said, I have debian/i3 INSTALLED ON A 16GB USB with a couple of docker containers and vscodium and it is around 10/14gb usage.

    • Cwilliams@beehaw.org
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      I’m totally going to try that now! I wonder if I could use this to avoid Windows on the terrible computers at my school. Does it boot just like installation media or something?

      • mhz@lemm.ee
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        8 months ago

        That is why I’m actually doing it, we have a couple of old workstation with Win7 we almost never use at my workplace. I use my portable debian on these machines to practice bash scripting, python and recently docker.

        I few thing to consider:

        • use the fastest usb drive you can get, you will be held back by its access/write speed
        • Install the boot loader on the usb drive.
        • you can install ‘xrdp’ to access remitly using thw windows remote desktop.
        • You will probably find a docker image of things you are interested in, I recently switch from codium (apt) to codercom/code-server docker image, this way I can access vscode from a browser on any worstation on my workplace.
        • Routing can be a bit challenging if your organisation/school use its private intranet, but I set my debain instance (with my phone attached to it in usb tithering mode) to use tinyproxy to connect to the internet from (preferably portable) firefox from any workstation at my workplace.
        • Dont tell my boss.
        • Cwilliams@beehaw.org
          link
          fedilink
          arrow-up
          1
          ·
          8 months ago

          Thanks for the explanation! I looked into it, and it’s actually not possible to boot from a USB drive on my school’s computers without an admin password 😢. But thanks anyway!

  • duncesplayed@lemmy.one
    link
    fedilink
    English
    arrow-up
    4
    ·
    8 months ago

    This is my one gripe with Debian’s installer. I don’t mind it setting defaults like 27G for / and 10G or whatever for /tmp. But I don’t like that you can’t stop it from allocating the entire volume. If it left a few hundred GB unallocated, then it would be trivial to expand whichever one you realize you need to expand later on.

    As it is, if you want to give more room to one partition or another later on, you have to shrink /home first. If /home is ext4, that’s inconvenient. If it’s XFS, though, it’s a nightmare.

  • stuck_in_the_shell@programming.dev
    link
    fedilink
    arrow-up
    5
    arrow-down
    2
    ·
    8 months ago

    It’s fine. “Only 27GB” is hardly too small for the system, even a bloated system wouldn’t take that much space.

    But if you must have a larger partition I think a reinstall would be easier, resize the partition is possible but because of the encryption not a straight forward thing. I wouldn’t bother really.

    • imaradioOP
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      If LVM isn’t somehow mitigating the issue I will do a reinstall.

      I have run out of space on / before and it is a huge pain in the ass. I do not need much room for /home on this system so I would prefer to be cautious and avoid problems down the road.

      Hopefully I will be able to figure out how to specify this… maybe a different installer image.

      • flux@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        8 months ago

        It’s two commands to grow the / fs on the fly:

        lvextend -L+10G /dev/mycomputer-vg/root
        resize2fs /dev/mycomputer-vg/root
        

        So don’t worry about it. LVM is great :).

        • imaradioOP
          link
          fedilink
          arrow-up
          1
          ·
          8 months ago

          That is my previous experience. I guess i missed it somehow.

  • bizdelnick@lemmy.ml
    link
    fedilink
    arrow-up
    3
    ·
    8 months ago

    27G is OK. But LVM gives you ability to resize the volume at any time if you need. So don’t worry about this. Check df -h, if you have less than 10G used and you are not going to install a lot of very heavy packages (e. g. games with large resources; I mean only deb-packaged ones, not Steam etc. that go into /home), it is highly likely that you will never get in trouble because of / size.

  • Tobias Hunger@programming.dev
    link
    fedilink
    arrow-up
    3
    arrow-down
    2
    ·
    8 months ago

    Add a /var partition, boot from some live system, copy over the data, delete it in the root partition after making sure it was copied ok and add the new filesystem to fstab. /var is the only place we that will grow significantly(especially when younuse flatpaks).