My father has reached an age where money means very little to him and his interest in “proper” furniture has skyrocketed. He will go out and buy a simple table for $3k-5k and tell me how the same model was bought for the American embassy in year x, or send me links to matching chairs by designer y.
I’ve yet to see a piece of furniture that’s worth twice the price of what you can find on IKEA. A table needs to be water/stain resistant and that’s about that. /rant
My grandfather was a high-end carpenter and furniture maker. He made some really nice cabinets and tables. He taught my dad all about both how to determine good quality furniture and how to make it. But my dad was not a carpenter, so quite a lot of the latter information was lost on him. What he did remember he (my dad) relayed to me. But I have only retained parts of what he relayed. Determining good vs bad quality furniture though? I remember most of that.
So now when I am looking at a new piece of furniture I can see whether it’s well or badly made. And let me tell you, the furniture made today is absolute shite quality unless you want to pay a lot for it. If you just want something for the next few years that’s fine. But if you want something to last (especially something that lasts the onslaught of abuse kids put it through), that’s a problem. But can I made such furniture? Hell no! All I can do is see the poor quality of most modern furniture and lament it. It’s a bit of a shit situation to be in, honestly.
That said, there’s still some really older good stuff available at second hand and thrift stores, and at estate sales. And it’s usually available for a good price.
It’s frustrating trying to find a good mid-range furniture store. It seems like you’re either buying stuff dirt cheap or spending a fortune, with little in between.
Woodworker here. Do I detect an under-served market segment?
I personally dislike 4 inch thick slab river tables as much as I dislike particle board bookshelves that bow under their own weight, and I’m perfectly happy to build $200 shaker end tables out of pine.
I got a table and some chairs from Torbjørn Afdal, Darby series that’s designed in the 1960s with Brazilian Rosewood. It’s not too expensive at ~2000€ and it’s a nice, well built table, and extendable for when you host an event, but having to worry about damaging the table vs some IKEA table you don’t really care about makes me prefer cheap furniture just for the ease of mind.
Okay, but if I compare my Ingo to Pfister’s Riverside the first thing I notice is this:
I very early on made a very conscious decision that I wouldn’t put much effort into keeping it in pristine condition and would instead allow it to develop some character; if some liquid leaves a stain by embedding itself into the wood, then that would be a part of the tables story. Burnmarks? The same. And not only does that attitude make you much more relaxed, it gives the table character and it has been dealing with it very well. When I wanted to have a power-strip in the middle of the room I just screwed it to the underside of the table and brought the cable with some cable-holders that I nailed into it, to one of its feet and have been extremely happy with that ever since.
Very few people, and I am very much not one of them, would be comfortable taking that kind of approach with a ≈1000€ table and I can assure you that I would be less happy for it.
And yes, I care about the table being reasonably durable (which it is), but it being cheap is a feature beyond price too, and the largely untreated pine from which it is made is something that I like: I really enjoyed the smell that it had when it was still new.
My father has reached an age where money means very little to him and his interest in “proper” furniture has skyrocketed. He will go out and buy a simple table for $3k-5k and tell me how the same model was bought for the American embassy in year x, or send me links to matching chairs by designer y.
I’ve yet to see a piece of furniture that’s worth twice the price of what you can find on IKEA. A table needs to be water/stain resistant and that’s about that. /rant
I’m more interested in avoiding plastic as much as I can. Having plastic infused pressed sawdust wrapped in plastic veneer is very unappealing to me.
Ya this is true. Ikea desks/tabletops are pretty garbo.
Ikea does have some nice solid wood furniture, but it’s not cheap. If you’re not okay with spending 5 times as much, you’re getting MDF garbage.
My grandfather was a high-end carpenter and furniture maker. He made some really nice cabinets and tables. He taught my dad all about both how to determine good quality furniture and how to make it. But my dad was not a carpenter, so quite a lot of the latter information was lost on him. What he did remember he (my dad) relayed to me. But I have only retained parts of what he relayed. Determining good vs bad quality furniture though? I remember most of that.
So now when I am looking at a new piece of furniture I can see whether it’s well or badly made. And let me tell you, the furniture made today is absolute shite quality unless you want to pay a lot for it. If you just want something for the next few years that’s fine. But if you want something to last (especially something that lasts the onslaught of abuse kids put it through), that’s a problem. But can I made such furniture? Hell no! All I can do is see the poor quality of most modern furniture and lament it. It’s a bit of a shit situation to be in, honestly.
That said, there’s still some really older good stuff available at second hand and thrift stores, and at estate sales. And it’s usually available for a good price.
It’s frustrating trying to find a good mid-range furniture store. It seems like you’re either buying stuff dirt cheap or spending a fortune, with little in between.
Woodworker here. Do I detect an under-served market segment?
I personally dislike 4 inch thick slab river tables as much as I dislike particle board bookshelves that bow under their own weight, and I’m perfectly happy to build $200 shaker end tables out of pine.
I have had a table from K-Mart for at least 10 years. Every 3 years I sand the top and restain it and it keeps on doing table things like a champ.
Just checking, what product do you “stain” your table with?
Pepsi
That does explain lasting only 3 years.
D-A-CH only, but Pfister makes solid wood, high quality furniture. Costs twice as much tho.
I got a table and some chairs from Torbjørn Afdal, Darby series that’s designed in the 1960s with Brazilian Rosewood. It’s not too expensive at ~2000€ and it’s a nice, well built table, and extendable for when you host an event, but having to worry about damaging the table vs some IKEA table you don’t really care about makes me prefer cheap furniture just for the ease of mind.
Okay, but if I compare my Ingo to Pfister’s Riverside the first thing I notice is this:
I very early on made a very conscious decision that I wouldn’t put much effort into keeping it in pristine condition and would instead allow it to develop some character; if some liquid leaves a stain by embedding itself into the wood, then that would be a part of the tables story. Burnmarks? The same. And not only does that attitude make you much more relaxed, it gives the table character and it has been dealing with it very well. When I wanted to have a power-strip in the middle of the room I just screwed it to the underside of the table and brought the cable with some cable-holders that I nailed into it, to one of its feet and have been extremely happy with that ever since.
Very few people, and I am very much not one of them, would be comfortable taking that kind of approach with a ≈1000€ table and I can assure you that I would be less happy for it.
And yes, I care about the table being reasonably durable (which it is), but it being cheap is a feature beyond price too, and the largely untreated pine from which it is made is something that I like: I really enjoyed the smell that it had when it was still new.
Yeah, but i got my bedroom from them.