In light of the recent TunnelVision vulnerability I wanted to share a simple firewall that I wrote for wireguard VPNs.

https://codeberg.org/xabadak/wg-lockdown

If you use a fancy official VPN client from Mullvad, PIA, etc, you won’t need this since most clients already have a kill switch built in (also called Lockdown Mode in Mullvad). This is if you use a barebones wireguard VPN like me, or if your VPN client has a poorly-designed kill switch (like NordVPN, more info here).

A firewall should mitigate the vulnerability, though it does create a side-channel that can be exploited in extremely unlikely circumstances, so a better solution would be to use network namespaces (more info here). Unfortunately I’m a noob and I couldn’t find any scripts or tools to do it that way.

  • DarthYoshiBoy@kbin.social
    4·
    2 months ago

    If you use a fancy official VPN client from Mullvad, PIA, etc, you won’t need this since most clients already have a kill switch built in (also called Lockdown Mode in Mullvad).

    According to the researchers…

    The result of this is the user transmits packets that are never encrypted by a VPN, and an attacker can snoop their traffic. We are using the term decloaking to refer to this effect. Importantly, the VPN control channel is maintained so features such as kill switches are never tripped, and users continue to show as connected to a VPN in all the cases we’ve observed.

    Killswitches are insufficient protection since the TunnelVision attack never disables the VPN tunnel. The TunnelVision attackers are instructing your physical layer connection to route everything through a node of their choosing rather than killing your VPN connection, and since the VPN connection never drops, a killswitch will never engage. The VPN stays up, thinking it is doing a good job, but in the meantime your network interface has been instructed to route no traffic through the VPN and instead route everything to the location of the attacker’s choosing. I have heard that a couple of VPNs think their clients are not vulnerable here, but I haven’t seen independent conclusive proof one way or the other yet.

    I suspect that your “Solution” also fails to mitigate the issues in TunnelVision because it allows LAN access to the physical interface. In a TunnelVision attack the hostile has to be on your LAN (or rather the same LAN you are on since I suspect that “The coffee shop wi-fi” is the more likely network for an attack like this) already, so if they’re going to tell your interface to route traffic somewhere else, in all likelihood that somewhere else will already be in the same LAN you are and their exfiltration will be allowed under your configuration.

    • xabadak@lemmings.worldOP
      1·
      2 months ago

      Actually my firewall is persistent, just like many of the other good VPN clients, so “kill switch” is a bit of a misnomer. Which is why I called it wg-lockdown, named after Mullvad’s lockdown mode. Persistent firewalls are effective, they just add a very tiny side-channel, as discussed in the link in my post. I just used the terms “kill switch” in my post because that’s what many other people use.

      Though the point about the LAN is a good point, I didn’t consider that. I added LAN access because without it, the firewall was interfering with the networking of my docker container and virtual machines, which use local subnets. Even the official Mullvad client has issues with this. What do you recommend in this case? Manually whitelist the local subnets used by docker and my other virtual networks?

      Edit: actually upon reading Mullvad’s statement on TunnelVision, I realized that my firewall is still effective because it only allows traffic directed to LAN IP’s to bypass the VPN. So regular internet traffic will be blocked if the attacker tries to redirect it to the LAN. I’m glad I used Mullvad as a reference implementation 😅