• aeronmelon@lemmy.world
    link
    fedilink
    English
    arrow-up
    17
    ·
    5 months ago

    Would Lemmings be so kind as to post their USB-A/C memory sticks of choice?

    Right now I have a small collection of Kingston USB drives I bought a decade ago. Haven’t had any issues with them yet, but I know they won’t last forever. They’re all named Reebok[storage capacity] (because sneaker-net).

    • Smokeydope@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      ·
      5 months ago

      I really like what explainingcomputers did for their pi4 build, where they basically convert a m.2 SSD into a big usb thumb drive with a simple metal enclosure. Check it out, the timestamp you want is 6:25

      • redcalcium@lemmy.institute
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        5 months ago

        I went this route as well. You can get a good quality usb 3.1 portable nvme enclosure for ~$20-$30 (be careful not to accidentally buy the msata version, which is cheaper but slower). Now you have a very fast thumbdrive! The main drawback is, unlike traditional thumbdrive, I can’t use it on my android phone. Not sure if higher end phone with usb 3.1 port can actually use it.

        • circuscritic
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          5 months ago

          Your Android phone can mount an external drive enclosure over OTG, just make sure it’s compatible and formatted properly.

          • elvith@feddit.de
            link
            fedilink
            English
            arrow-up
            2
            ·
            5 months ago

            Depends on how much current the drive draws. If the m2 SSD needs more current than your regular thumb drive, your phone might not supply enough power and it stays unusable.

            Besides that, as long a the enclosure uses the standard protocol and the filesystem is supported by Android, it should work

          • redcalcium@lemmy.institute
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            5 months ago

            My old Android phone only has USB 2.0 port and can’t mount the external nvme drive (I tried with a USB 3.1 otg dongle). The same nvme drive with the otg dongle works on M2 MBA though.

        • w2tpmf@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          5 months ago

          I have an nvme enclosure with USB on one end and USBC on the other end. It reads on my Pixel phones as well as on my Samsung tablet.

          Now that you mention 3.1 compatibility with devices, I wonder if my enclosure is only 3.0 or if all my devices support 3.1. I’ve never done a speed test on it, but I guess I should.

    • u/lukmly013 💾 (lemmy.sdf.org)@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      edit-2
      5 months ago

      I buy SanDisk CruzerBlade drives from AliExpress. Of course, there’s a risk you get a fake one, but with how cheap they are already, it might not be worth it manufacturing fakes anyway.
      There’s a scratch-off sticker at the back with a code to check on SanDisk website. It will also tell you whether it was checked before, which would mean it was copied.

      They don’t seem to have the best sequential write speed, but have great random-access, at least compared to some other random flash drives one of which was Panasonic drive.
      This is great if you want to run programs off of the flash drive, or even a whole OS. Under normal use, even a USB 2.0 CruzerBlade performs better than my 5,400RPM SMR HDD running Linux Mint, granted you’re not copying large files or downloading stuff. Of course, in that case USB 3 version (Ultra Shift) is better.

    • TwanHE@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      5 months ago

      My SanDisk usb A/C dual 64gb has been abused for quite some time and still works perfectly. Hosted a portable windows install so I could test pcs and has probably transferred more than 2tb of GoPro footage sofar.

    • barsoap@lemm.ee
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      5 months ago

      I don’t have a need for any (if I need USB storage for an OS image or such there’s always the card reader and a 64G Samsung MicroSD I have lying around), but if in doubt I’d go with Samsung or Crucial on the basis, just like with SSDs, that they produce their own NAND.

      …and looking around it doesn’t seem that Crucial is producing USB sticks. So Samsung it is. 10 bucks for 64G for the cheapest isn’t bad if you ask me. Fast ones the cheapest seems to be around 30 bucks for 256G, 400MB/s read 110MB/s write that’s bordering on SATA speeds.

      Kingston certainly is a reputable company though, they won’t use completely bargain-bin chips or pull false capacity shenanigans. But they also won’t be significantly cheaper than the chip manufacturers.

      Another option would be to buy a USB case for an old SATA or M.2 SSD you have lying around, or are eyeing to upgrade. Or use your phone.