I’m not looking for a solution or even code, just a hint. Here’s what I currently do:

  1. Add the current position and heading to the recorded path
  2. Check if turning right would lead back onto the recorded path in the same direction we walked it before
  3. Check if the next field is obstructed
    1. If so, turn right
    2. Repeat until no longer blocked
  4. Update current position

This approach works fine for the unit test, but yields a result too low for the puzzle input. I tried adding recursion to the party check, but even 20 levels of recursion didn’t sufficiently increase the amount of options found, suggesting I’m missing a mechanism to identify them.

Any clues?

Current state of affairs:

from math import sumprod
from operator import add
from pathlib import Path


def parse_input(input: str) -> list[list[int]]:
    return input.strip().splitlines()


def find_guard(world: list[list[int]]) -> tuple[int]:
    for y, line in enumerate(world):
        x = line.find("^")
        if x > -1:
            return (y, x)
    return (-1, -1)  # No guard


def turn(heading: tuple[int]) -> tuple[int]:
    mat = [(0, 1), (-1, 0)]
    return tuple([sumprod(col, heading) for col in mat])


def step(pos: tuple[int], heading: tuple[int]) -> tuple[int]:
    return tuple(map(add, pos, heading))


def is_blocked(world: list[list[str]], guard: tuple[int], heading: tuple[int]) -> bool:
    pos = step(guard, heading)
    try:
        return world[pos[0]][pos[1]] == "#"
    except IndexError:
        return False


def cast_ray(
    world: list[list[int]], start: tuple[int], heading: tuple[int]
) -> list[tuple[int]]:
    pos = step(start, heading)
    ray = []
    try:
        while world[pos[0]][pos[1]] != "#":
            ray.append(pos)
            pos = step(pos, heading)
    except IndexError:
        # Left the world
        ...
    return ray


def part_one(input: str) -> int:
    world = parse_input(input)
    guard = find_guard(world)
    heading = (-1, 0)
    while (
        guard[0] >= 0
        and guard[0] < len(world)
        and guard[1] >= 0
        and guard[1] < len(world[guard[0]])
    ):
        while is_blocked(world, guard, heading):
            heading = turn(heading)
        world[guard[0]] = f"{world[guard[0]][:guard[1]]}X{world[guard[0]][guard[1]+1:]}"
        guard = tuple(map(add, guard, heading))
    return sum([line.count("X") for line in world])


def part_two(input: str) -> int:
    world = parse_input(input)
    guard = find_guard(world)
    heading = (-1, 0)
    path = {}
    options = 0
    while (
        guard[0] >= 0
        and guard[0] < len(world)
        and guard[1] >= 0
        and guard[1] < len(world[guard[0]])
    ):
        path.setdefault(guard, []).append(heading)
        turned = turn(heading)
        if turned in path.get(guard, []) or turned in [
            d
            for p in set(cast_ray(world, guard, turned)).intersection(set(path.keys()))
            for d in path[p]
        ]:
            # Crossing previous path and turning would cause us to retrace our steps
            # or turning would lead us back into our previous path
            options += 1
        while is_blocked(world, guard, heading):
            heading = turned
        world[guard[0]] = f"{world[guard[0]][:guard[1]]}X{world[guard[0]][guard[1]+1:]}"
        guard = tuple(map(add, guard, heading))
    return options


if __name__ == "__main__":
    input = Path("input").read_text("utf-8")
    print(part_one(input))
    print(part_two(input))
  • SteveDinn
    link
    fedilink
    arrow-up
    1
    ·
    2 days ago

    I totally brute forced this one, and it only took about 2 seconds to run, so I call that a win.

    • Keep track of all points visited on part 1.
    • loop over them, placing an extra rock at that position each time through.
    • run part 1
    • if you ever end up at any position you had already visited while facing the same direction, then you’re in a loop.
    • Otherwise, stop if you go off the map.
  • hades@lemm.ee
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    4 days ago

    Check if turning right would lead back onto the recorded path in the same direction we walked it before

    You’re checking this by casting one “ray” in the direction you’re turning. This will not always detect a cycle, it will only detect it, if your traversed path has already crossed one of the points of that “ray”. For example in this case:

    .%..
    ...#
    #...
    .^#.
    

    where % is the place where we put an obstacle.

    Unrelated to the algorithm, I’ve noticed that you’re using type hints (which is great), but do you actually run a type checker? Because I don’t think tuple[int] is the correct type for values like (0, 1).

    • Chais@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      4 days ago

      I’m only casting a ray to detect where turning right now would lead. So to stick with your example:

      .O..
      -^+#
      #++.
      ..#.
      

      If the guard had come from the left and run this little loop I’d detect this location to place an obstacle.
      Alternatively, if I switch back to recursive rays, I’d detect this location a little later:

      .O..
      .^.#
      #|..
      .|#.
      
      • hades@lemm.ee
        link
        fedilink
        arrow-up
        1
        ·
        4 days ago

        But is it guaranteed that the guard will ever come from the left? As far as I can tell, you are just retracing the path from the part one.

        • Chais@sh.itjust.worksOP
          link
          fedilink
          arrow-up
          1
          ·
          4 days ago

          That’s what I meant with the second part of my reply. With a recursion depth of at least 4 it’ll detect the option for a loop at the location of the ^.

  • lwhjp@lemmy.sdf.org
    link
    fedilink
    arrow-up
    1
    ·
    4 days ago

    I’d suggest doing a really naive solution first to check your algorithm: that is, build a whole new map with the new obstruction added along with all the others, then compute the path as in part 1 (but don’t forget to check for a loop!)

    That will get you the correct answer, and then you can check your desired algorithm in various cases to see where it goes wrong.

  • jdnewmil
    link
    fedilink
    arrow-up
    4
    ·
    6 days ago

    I think your step 2 is incorrect. Traversing the direction you came from is perfectly legitimate. But if you move onto a location+heading that you traversed before, that is a loop.

    • Chais@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      6 days ago

      But if you move onto a location+heading that you traversed before, that is a loop.

      Which is the express goal of part 2.
      Conversely walking in the opposite direction would lead me right past any obstacle that cause me to turn. So it’s not particularly useful.

      • jdnewmil
        link
        fedilink
        arrow-up
        2
        ·
        6 days ago

        Well, since I solved it by allowing re-traversal in the opposite direction, perhaps you might want to re-think your assessment of my suggestion… whenever you get tired of being stuck on that problem.

  • Gobbel2000@programming.dev
    link
    fedilink
    arrow-up
    2
    ·
    6 days ago

    I also got stuck on part 2 for a while. What does your code do when you run into a corner and have to turn twice on one spot?

    • Chais@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      6 days ago

      It just keeps turning. See 3.2. Worst case is it has to turn twice and walk back where it came.

        • Chais@sh.itjust.worksOP
          link
          fedilink
          arrow-up
          1
          ·
          6 days ago

          Yes. For every step I check if turning would lead me back onto my previous path, either because I’m crossing it or because walking that direction will eventually bring me back onto it, passing the obstacle that cause me to turn.