I just received a new Fire TV cube gen 3, because my old one is malfunctioning. I know, I hate these devices myself, but it’s the only option right now, since a new version of the Nvidia shield isn’t coming in the foreseeable future.

So, I plugged in the power chord and the HDMI cable into the cube.

When it booted up it showed a screen that it’s downloading the newest update. At first I thought this must be some typo-bug on the initial boot steps, because I haven’t even connected it to the internet yet, neither via cable nor did I go through the wifi setup.

After the update has finished, I was greeted with my real name and the cube indeed had the actual WiFi settings!

WTF?! How’s that even possible?

  • PowerCrazy@lemmy.ml
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    10 months ago

    Media passthrough isn’t the same as streaming from the HTPC. IF you look directly above the quote above.

    For a HTPC, this means HDR support must be in the video, GPU, video interface (HDMI/DP) and ultimately your output device (typically a TV). HDR10 is supported on HTPCs under Windows, macOS Catalina, Android and (usually) libreelec/coreelec operating systems. Linux is NOT supported.

    So you if you have a HDR10+ source on your IntelNUC, or whatever, you can play that over HDMI 2.0 to a compatible TV without an issue.

    • adONis@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      10 months ago

      yes, playback might work, but it will fall back to HDR10 or even SDR, since not all metadata is passed through.

      So to fully take advantage of hdr10+, dolby vision, 5.1, atmos, and what not… each device in the chain, from the source to the output, and the hdmi cable, have to fully support it.