• UntouchedWagons
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    My laptop’s cpu normally idles at 40C but whenever I do something moderately complex it immediately shoots up to 60X and the cooling fan goes brrrr. I’ve tried replacing the thermal paste and even the heat pipe system but neither helped. :(

      • UntouchedWagons
        link
        fedilink
        English
        arrow-up
        7
        ·
        edit-2
        1 year ago

        I don’t know but there’s not much I can do about cooling in a laptop. The laptop is 8 years old and I don’t use it enough for this issue to be that big of a deal.

    • Dudewitbow@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      If its a modern intel laptop, its likely the PL2 clocks. The PL2 level is basically a time interval where the cpus run at a higher boost clock than sustained turbo, and ia defined to run at that for a short time period (e.g about 40 seconds) before clocking to the standard boost clocks (PL1). Its why laptops heat up fast and ramp very quickly. It makes processors seem faster than they are. (Similar to like running speed in a 40 yard/meter dash vs a marathon running speed)

      • UntouchedWagons
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        The laptop has a 4th gen cpu, I think an i3 so it’s probably not classified as modern lol.

        • Dudewitbow@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I see. I also have an old laptop (4th gen i7). I personally use throttlestop to limit its turbo clock speeds just for sake of noise.

          • UntouchedWagons
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            I decided to try undervolting my laptop’s cpu and found the intel-undervolt tool. It seems that reducing cpu voltage by 25mV has solved the issue.