Seagate this week unveiled the industry’s first hard disk drive platform that uses heat-assisted media recording (HAMR). Tom’s Hardware:

The new Mozaic 3+ platform relies on several all-new technologies, including new media, new write and read heads, and a brand-new controller. The platform will be used for Seagate’s upcoming Exos hard drives for cloud datacenters with a 30TB capacity and higher. Heat-assisted magnetic recording is meant to radically increase areal recording density of magnetic media by making writes while the recording region is briefly heated to a point where its magnetic coercivity drops significantly.

Seagate’s Mozaic 3+ uses 10 glass disks with a magnetic layer consisting of an iron-platinum superlattice structure that ensures both longevity and smaller media grain size compared to typical HDD platters. To record the media, the platform uses a plasmonic writer sub-system with a vertically integrated nanophotonic laser that heats the media before writing. Because individual grains are so small with the new media, their individual magnetic signatures are lower, whereas magnetic inter-track interference (ITI) effect is somewhat higher. As a result, Seagate had to introduce its new Gen 7 Spintronic Reader, which features the “world’s smallest and most sensitive magnetic field reading sensors,” according to the company. Because Seagate’s new Mozaic 3+ platform deals with new media with a very small grain size, an all-new writer, and a reader that features multiple tiny magnetic field readers, it also requires a lot of compute horsepower to orchestrate the drive’s work. Therefore, Seagate has equipped with Mozaic 3+ platform with an all-new controller made on a 12nm fabrication process.

Abstract credit: https://hardware.slashdot.org/story/24/01/19/1149214/30tb-hard-drives-are-nearly-here

  • Transporter Room 3@startrek.website
    link
    fedilink
    arrow-up
    35
    arrow-down
    1
    ·
    11 months ago

    I remember not too long ago mentioning my 5TB external drive, some rando on reddit saying “those don’t even exist” and everyone jumping on the down vote train saying my picture of it was fake.

    And here we are only a few years later.

    Pushing 30.

    • Bonehead@kbin.social
      link
      fedilink
      arrow-up
      16
      arrow-down
      1
      ·
      11 months ago

      To be fair, I doubt that they were saying they didn’t believe drives could be that big. It’s that 5TB is an unusual size, and as far as I can tell only come in external drives. I personally have never seen one or even knew they existed until now, but I only buy bare drives.

        • Bonehead@kbin.social
          link
          fedilink
          arrow-up
          3
          ·
          11 months ago

          No, there are a few that I found once I went looking. One was a 2.5 inch which is likely used in external drives, the others were enterprise level drives. They are just not things I normally search for, but they do exist.

      • Kairos@lemmy.today
        link
        fedilink
        arrow-up
        5
        ·
        11 months ago

        5TB is used in 2.5” form factors because it appears to cap out whatever manufacturing process they use for those. There’s no 6TB 2.5”s

        • Bonehead@kbin.social
          link
          fedilink
          arrow-up
          1
          ·
          11 months ago

          There are no platter drives above 5TB. There are plenty of 2.5 inch SSDs available above that size. This is less a technical limitation and more of a business decision though.

    • cryptiod137@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      11 months ago

      When was that lol? I’ve had 10TB externals, which I bought through sales I found on Reddit, for over 5 years?