So return it if you bought a TV like that.

Buy these things with a credit card. If the store refuses a return or demands a restocking fee, credit card dispute. Visa doesn’t fuck around with this stuff.

I have had a SV08 for a few weeks. Had a K1 Max for the same time period. I had 2 or two failed prints on the SV08 and about 3 dozen failed prints.

I returned the K1 Max (with huge struggles with support)

Previously I had a Labist ET4 that only worked for a out 5 prints total before giving up on it.

I will agree with your statement. If you are willing to put in a bit of research on YouTube and GITHUB and swap a few parts and spend a few hours you’ll have a hilarious large printer that just spits out almost anything you throw at it, besides ABS and ASA… For now…

But a 135 QR 29er wheel isn’t that special, so finding one that wasn’t either a junk hub or $600 hub shouldn’t have been an issue. Even finding TA non boost wheels is becoming difficult.

I ended up finding a lightly used Nukeproof wheel for around $100.

Thankfully the fork on that same bike is just using off the shelf SRAM parts.

Except if they change BB or axle spacing standards, which seems to be happening every few years.

I struggled to find a half decent 135 QR 29er wheel last year for my Trek Xcaliber. A nearly $2000CDN bike from 2016 with nothing wrong except the free hub, and everywhere told me to just get a new bike.

I like my bikes, but I really hate the people running the industry.

That was the Nexus 6P. Nexus 6 was made by Motorola and overall an amazing phone

Keepalived

I run multiple pinholes using keepalived. Then I only use one DNS in my DHCP server. Second pihole will seemlessly take over if the first one goes down whilst using the original DNS address.

Work quite well. I had to learn the hard way that only using a single pihole was just asking for my partner to be mad when it didn’t work / when I was doing server maintenance. Now I have multiple and they can all seemlessly take over if any my server nodes are down

I’ll die before I give up my automatic wipers! Thankfully my 2004 and 2013 VWs have it and don’t lock me out of features like new cars.

Linux runs on anything.

That is not correct. The DRAM is not part of the same die that the SoC is on. It is separate packages directly beside the SoC. The storage is also separate packages.

If it was all one die it would be huge and have poor yields.

How is your Plex install so big? My library is like 6x larger and my Plex install lives in a 24GB VM

deleted by creator

I am sure I am in the minority, but avoid AAC multi channel encodes as much as possible. It really makes no sense for anyone. Most home theater equipment does not support it. AC3 or eAC3 are supported by nearly every device natively. AAC does not work over SPDIF or HDMI ARC without reencoding. All that for a slightly lower bitrate? No thanks. Plus most are likely encoded from a AC3 or eAC3 so they will sound worse than the native version.

A heat pump isn’t any more efficient than a AC only unit of the same SEER rating. They are literally the same system with the heat pump having a couple extra valves and parts to reverse the flow of the refrigerator.

“Modern Device” aka Apple TV, AndroidTV, iOS or MacOS. No app for Android phones.

The core technologies that UTDC (then Bombardier, now Alstom) took from this is still being used all over the world. The new Vancouver SkyTrain is still using Linear Induction Motors.

A lot of light rail uses resilient wheels and heavy rail does not.

Wheel profiles (the shape of the part that actually touches the rail) are also very different between different categories.

Wheels are 100% different on Heavy Rail, Metros and Light Rails.

In addition to that all 3 have different requirements for curves, runout and grades.

Source: my employer makes all 3.

Is there any mirrors with newer builds? I could only find the earlier releases when I looked.

AAC is such a stupid codec to use for anything other than 2.0 channel.

5.1 / 7.1 AAC doesn’t work over ARC. Over eARC it need to be decoded to LPCM and then sent out. It doesn’t work with SPDIF.

Both eARC and SPDIF will most likely get downmixed to 2ch.

448 or 640kbps AC3 is perfectly fine and has great compatibility, SPDIF, ARC, eARC. Pretty much all blurays and DVDs will also have a AC3 track.