Okay so currently my closest matching server would be my R730XD which is running dual E5-2650v4’s which should have a similar power profile(the only diffrence with the 2680 is the number of cores however this shouldn’t make much of a diffrence for low use workloads).

So currently with 2x SSD’s, 2x2650v4’s, 128GB RAM, 6x18TB HDD drives, 3x16TB HDD drives my power consumption sits around the 225-250W which over a month for me costs me about 50-75 euros a month in power(welcome to dutch power pricing…). However alot of this consumption comes from the drives, because before I put the HDD’s in and just had the SSD’s, the RAM and the CPU’s it had an idle of around 80-100W. But this is in an enterprise server with some chonky drives so I assume those account for 5-15W as they have a base speed.

Generally I would say unless you specifically need functions that the board provides(alot of PCIE lanes for example) just get a consumer CPU and you’ll be much better off as it will have better efficiency, performance and you’ll be on a modern platform. And if you go for AM4 it will be really cheap cuz of the introduction of AM5.

Honestly I do love tailscale, but every time when I start using it I am just like… meh. I don’t need a bunch of interconnected as I have 1 homelab, and for other stuff like my backup system it goes over v6 so there is no NAT to speak off(just a firewall). And for any remote devices I just use plain wireguard including my always on VPN on my devices.

However I will continue to recommend Tailscale to people who are new to selfhosting and don’t want to deal with all the networking bullshit, and hey if you want to not be reliant on the tailscale control server host headscale.

Check my reaction on u/AirborneArie comment.

So it depends in how many individual drives you want it, I am from NL so that’s where I draw reference from.

The lowest $/TB I have seen have been on 18TB drives new(HC550’s) which had an insane deal for 200 euros a piece(For new drives with warranty etc this is basically an insane deal), which means it’s 11.1 Euro/TB so the cheapest way to do that assuming you do raid0(so 0 redudancy if 1 drive fails you lose everything) it would be 9 of these drives(162TB).

So assuming you don’t want 0 redudancy I would say on an array of 9 drives you would do(depending on what your focus is on you would alter how many vdevs etc) 2 drives of parity(raidz2 assuming your using ZFS/RAID6 in others), which would mean it would put you to 11 drives which would at this “best price” would be 2200.

Generally the best no deal price I have seen is around 300 euro per 18TB drive,so assuming you do that deal the no redudancy array would cost you 2700, and the array with 2 drives of parity would cost you 3300.

Do realise this is dutch pricing, which might vary widely from where your from. And this is buying new and you can generally find recertified drives cheaper while not necesarrily being worse.

I also recently installed it on Tizen(Samsung’s OS) and using the docker container(https://github.com/babagreensheep/jellyfin-tizen-docker) it was stupidly easy and the hardest part was enabling developer mode.

I just use my domain inside my network which is a .net

So the only thing I will say is that the problem with a “DocuSign” alternative is that docusign is more accepted within the proffesional community and when docusign says something was signed it’s trusted. In this case what is to say you don’t modify the data or something similar, I know you could send out a confirmation e-mail or whatever but you get my point.

But ofcourse I will always take more apps that can be selfhosted :D

Well… answer is I didn’t know NTFY had a built in SMTP server. I just used this combo cuz before I used it to send my notifications to discord which mailrise makes easy. I will say that mailrise does let you more granulary define what e-mails will be sent to what topic while NTFY just uses the recieving address as the topic which might not be wanted.(I can for example define stetsed@* which means it doesn’t matter if I use one of my other domains, or father@* which means he could use whatever domain he would want).

Jesus christ your lucky, those sell for some serious dough. I don’t even see Rx40 on the second hand market much, mostly going from Rx10/20’s to Rx30’s now.

So it depends what you want to do, if it’s just playback(as in you get your media via another device) any device will do just fine like a Pi4 with an external HDD(especially with them dropping in price after Pi5 announcement). However this will limit your expansion so the question becomes how much storage you think you will need. As the TV can nativley handle all those formats you don’t need to do any transcoding, however personally I would say get something with a little more buffer room for if you ever do wanna play from a device that can’t nativley display those things, or for if you ever want to expand your storage.

So I would recommend Qbittorent combined with gluetun and your VPN of choice, I personally use ProtonVPN for my Linux ISO stack simply because it still has a form of port forwarding(NAT-PMP) which I can combine with scripts to get it port forwarded. However besides that I used to use mullvad and it worked great and can highly recommend although it is a bit more on the expensive side(both mullvad and protonVPN are, mullvad being 5 euro per month, proton being 10 euros if you pay monthly 6 if you pay yearly, 5 if you pay for 2 years).

I use these because they have a reputation for being less shady than other VPN companies like NordVPN/Express/(Insert other VPN that sponsors every youtuber under the sun). But it will depend on what you want and what you are willing to spend.

I use protonvpn due to me getting it with my proton unlimited bundle, and on the plus side with some scripting I can use the proton NAT-PMP forwarding with my qbittorent to get port forwarding while… distributing and acquiring Linux isos.

I personally did use Mailrise and I might consider setting it up again soon(Currently onlything I really have notifications for are Movie/Series acquisition and when that happens which goes via discord, and Proxmox which just goes directly to my e-mail provider without any proxy. Yes it shouldn’t work cuz my provider should reject the mail, but it does so I am not gonna complain about it).

I do also have a sendgrid free plan so i could use that, but I don’t like to rely in such cases on other providers I don’t have much faith in and that it’s not encrypted. Ideally I would have it go via signal but currently the signal API that is available for Apprise(via an external app) doesn’t let you send it in a “note to self” fashion and you would need to send from an external number, and sadly I do not have the knowledge of Go to take a shot and try to fix it myself.

I might also look at setting up ntfy.sh again, the handy thing with ntfy.sh is it can be selfhosted with a workaround for push notifications, and what you can do is give each of your family members a specific topic to subscribe to for notifications, and then when mailrise detects that e-mail(let’s say [email protected]) it will send it to the topic that belongs to that user. Letting you be able to send password reset “e-mails” etc.