Hello dear selfhosters,

I’m planning to step up my WiFi game and after some research I feel a little lost. do have questions.

At the moment with an all in one router (a fritzbox ) and a WiFi range extender the coverage is not sufficient and the extended connection not reliable enough. So I plan to get two wireless access points. That would be all for now, in the future I am thinking about switching to opensense to get vlan support - I’d like to have one for iot devices, one for kids, one for guests.

The questions for now: If using access points with a software controler (I.e. T-Link EAP653 or UbiquitI U6+) can I just plug these into the router, turn WiFi in the router off and have the access points handle the WiFi? But IP addresses will still be assigned by the router, right? I don’t want to leave the router WiFi running with the same ssid because this will affect the smoth transition between access points managed by the software controler? If the software controller is down for whatever reason, will the WiFi still work?

Questions for later: Will opensense be able to handle vlans for WiFi connected decices or do they need to be configured in the controler software? Are the access points I mentioned suitable? I want WiFi6, not willing to spend more then double for WiFi6e, max 15-20 devices in the network, no cloud controller, generally I prefer open systems. Any better suggestions for devices?

Answers also to a single question are very much appreciated!

  • TCB13@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    8 months ago

    The Banana Pi is easy to get going, simply download the image and flash on a SD card. We’re talking about a vendor that actively supports OpenWrt after all.

    There are other devices supported by OpenWrt and this might interest you. Checkout the tables. There are also tons of Commercial routers / AP that are supported by OpenWrt and will provide a good experience but you’ve to pick them very carefully.

    About range its mostly the WiFi chip manufacturer and if you want open software or not. It boils down to: the devices with the most range and speed are usually powered by Broadcom (Ubiquiti and whatnot) but you don’t have OpenWrt for those chips because they don’t provide open-source drives. MediaTek and Atheros are very open-source friendly and they perform well but Broadcom is Broadcom.

    I’ve been running OpenWrt and DD-WRT (supports older routers some with Broadcom chips) for about a decade now and I don’t see me going back to bullshit vendors and their cloud stuff. I even deploy those on customers (usually small offices 10-50 people) and they’re happy with them as well. The Banana Pi BPI-R3 is my main router / AP and I’m very happy with it, more CPU and RAM than required for sure. I also deployed one at a customer and it runs flawlessly. Whenever the R4 is released I’ll deploy one to another customer who’s currently running a bit short as their current router is having trouble with more than 10 or 15 VPN clients connected at the same time.

    • Carunga@feddit.deOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      8 months ago

      Nice hints. Never really heard about the banana pie routers. Great to hear from someone with extended knowledge! You gave lots to read and think about. Setting up a mesh network requires some work but seems doable. Have you used it? Does it work for you once setup smoothly? Sounds great all in all but not sure if I can motivate myself for the extra effort (and the negative feedback for breaking the internet). Do you use the metal cases from banana pie and their WiFi antennas or are there better options? It will be in the living room and a not to techy look is required.

      • TCB13@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        Mesh works if the hardware supports it, no problems there. I do use the metal cases and their antennas, they’re reliable and solid options.

        As I said somewhere in this post the BPI-3 is overkill if you’re just looking for an AP, there are older older or newer commercial AP/routers that are cheaper that can also run OpenWrt. https://lemmy.world/comment/4971502