What kind/brand of devices do you recommend and where do your source them? Things like smart outlets, bulbs, sensors, etc.

I have a hard time sourcing gear because it’s all either locked to Amazon/Google or requires the manufacturer’s cloud services and their dedicated app.

I’m looking for devices that can work completely offline and only communicate with my HA/MQTT or at least a local base station that can bridge to HA.

For the last few years, I’ve been buying bulbs/outlets from AliExpress with Tasmota pre-flashed. Before that, I was ordering them from Amazon and re-flashing them, but that was always a crapshoot as not all of them were compatible with tuya-convert. They’re also ridiculously difficult to disassemble to flash manually.

Anybody willing to share some tips to source some new devices?

Edit: I’ve also built a few custom sensors with ESP8266 and ESP-Home but they’re not particularly pretty.

Edit 2: Thanks everyone! I think I’m going to look into some Zigbee devices and bridges. That sounds like the most “open” way to expand my smart home gear.

    • Admiral Patrick@dubvee.orgOPEnglish
      2·
      2 years ago

      Awesome, thanks. That’s a great starting point.

      Also, it’ll be nice to free up some wifi spectrum. My devices are all on an isolated 2.4 GHz network and that band gets quite noisy.

        • Admiral Patrick@dubvee.orgOPEnglish
          1·
          2 years ago

          Yeah, that’s probably the direction I’m going to start looking. Pretty much every device I run uses MQTT to communicate with HA, including some custom buttons I keep around the house.

          The only sticking point is going to be reconfiguring my HA server to speak to a USB device. It’s currently Dockerized, and I’ve got little experience passing through USB devices that aren’t serial adapters. Not a deal breaker, but definitely a speedbump.

          • boothin@infosec.pubEnglish
            4·
            2 years ago

            I’ve tried a few different USB zigbee coordinators, but the one I ended up sticking with is the 2652 based coordinator from tubeszb that is Ethernet or USB. I had issues with the USB passthrough to the vm whenever I had to restart the vm, so using that one over Ethernet fixed all my issues.

            • Admiral Patrick@dubvee.orgOPEnglish
              1·
              2 years ago

              Yeah, ethernet would be my preferred bridging mechanism. Thanks for the recommendation. Will look into some bridges from TubesZB.

          • witten@lemmy.worldEnglish
            2·
            2 years ago

            Passing through a USB device might be as easy as adding --device /dev/your/usb/device to your docker run command-line, first making sure the permissions on that device are such that they can be read by the container. (Or use the devices: equivalent if you’re using Compose.)