I’m trying to find replacement barrel bolts to hold the scales on a fixed blade knife.

The dimensions, as best I can measure, are:

Barrel Section: 6mm diameter and 8mm long Screw Thread: 4mm diameter and 6mm long Heads: 8mm diameter and 3mm thick with 2.5mm hex sockets

I have done a fair amount of web searching and I have looked at several of the large online tool and fastener companies. Almost everything I can find has a much thinner barrel and wider head.

Can anyone suggest where I should look for these?

  • Hazdaz@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    You know what they say about that… if McMaster doesn’t have it, it doesn’t exist.

    Consider a standard part that you can cut to fit your needs.

    Also consider Imperial sizes. 4 mm is almost exactly 5/32", 6 mm is almost 1/4" (roughly 1/2 mm smaller). You can much more easily change the length than any other dimension so find one that is longer than you need and cut to fit your needs.

    • Curious CanidOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’ll give it another try with Imperial measurements. Thank you!