Last week I made a post asking if I should buy an old vintage monitor.

Well, I went back to the recycled goods store this week and it was still there, so $30 later I have it, and it seems to just work*

There’s very little about this monitor on the internet, so I’m thinking of documenting as much as I can about it, especially as it’s Osborne branded so there could be some interesting history behind it.

* The power button is stuck on, and it does an occasional unsettling arc sound and the image slightly distorts for a millisecond. I believe the latter is fairly common among old CRTs but I don’t know much more than that.

  • PhilipTheBucket@ponder.cat
    16·
    5 days ago

    This is dangerous though bc very high voltage

    This cannot be stressed enough. You can kill yourself poking around in an old monitor. It’s not even hard to do. There are thousands of volts in there, just waiting, even when it’s unplugged.

    All of this advice is not really wrong, but I would revise all of it to “leave the cover on, unless it’s giving you an issue, in which case take it to someone who knows enough about this stuff to mess around with it safely.”

    • ragebutt@lemmy.dbzer0.comEnglish
      131·
      5 days ago

      Can’t learn if you don’t try!

      But seriously that person is correct you can die

      But also at the same time it’s a little overblown. My friends and I learned how to do this shit as dumbass 12-16 year olds without the support of the internet and we’re all still here. Research what you are doing, take your time, learn to discharge things safely. It’s not rocket science to discharge a capacitor or a tube. And with proper maintenance that monitor will run for at least another decade or two (but without it convergence issues and that arcing issue might worsen and take it out sooner rather than later)

      If you really don’t trust yourself to do it then find someone else though. There’s plenty of dorks out there who love tinkering with CRTs

      • JustARegularNerd@lemmy.worldOPEnglish
        4·
        5 days ago

        Thank you both for the advice, this was exactly what I needed - I know absolutely nothing about CRT maintenance but I have tinkered inside plenty other electronics before.

        Before I do anything on it I’ll be doing all the research I can to ensure it’s as safe as possible and avoiding areas that can’t be discharged, and otherwise hunting within my friend circles for a CRT guy who can help me with it.

        Edit: this will all serve as a lesson for me taking on a more ambitious project I have, an iMac G3 that doesn’t post. Unsure at this stage if the CRT works or not in it, but I believe something is wrong with the PC’s PSU currently

        • ragebutt@lemmy.dbzer0.comEnglish
          6·
          5 days ago

          Just keep in mind that pulling the anode cap of a crt is genuinely lethal electricity. Like you can get zapped pretty bad by a power supply cap (you should get in the habit of discharging these too) but generally unless they’re seriously big caps you won’t die. A crt can kill your tho so make sure you discharge it correctly. That’s why I say watch a video on how to do it, there are plenty of them and it’s much better to see what to do than follow a text description. Keep in mind that sometimes you have to discharge 2-3x (not usually but sometimes, and never hurts to be safe). You’ll see a spark and hear a pop. You can get a tool to discharge but an insulated screwdriver is all I ever used

          Macs of that era are a pain. Good luck. Check capacitors of course, replace battery, reset pmu. That era of mac you can get a service manual which is nice, get a meter and you can trace reference voltages thru power supply and logic board. Flyback is notorious in those imacs so look at that (same as above, check for burn, crack, loose, smell). 68kmla.org has a lot of great repair info on that era