Long story short, I am not mechanically inclined. I want my shit to just work. Somehow I decided I would order the MK4S upgrade kit for the prusa MK4 that I have. It took me about 12 hours but I did the upgrade and turned it on only to find it wouldn’t boot with a power panic error message.
I tracked it down to a cable that got disconnected during all the upgrading, and when I went to push it back onto the board it bent the pins. When I tried to straighten them out the pens broke off and now I have a $2,000 paperweight on my desk.
EDIT: Ok, i am now rested and calmed down, and no i will not be buying an X1C from the CCP Bambu. Support was indeed super cool, and i’d need to spend another 120 for a new xbuddy since mistakes like this are not under warranty. However, my dad is a lifelong hardware electronics pro, and he seemed to indicate this should be no sweat to fix, so we shall commit mad science before i just buy another one.
What board/connector is affected? At worst, a replacement connector and a soldering iron should be able to replace the damaged connector and get your printer in a functional state.
UPDATE: if you are referring to certain mainboard connectors, it may be best to replace the mainboard if you don’t have the tools for replacement. I see surface-mount connectors for some things on the mainboard that can be difficult to replace correctly without more unique tools.