Update: Based on the discussion here and in other places I added the following (well, technically I did something different in my colorscheme, but in the end it translates to that)

vim.api.nvim_set_hl(0, 'Normal', {})

This reverts the weird text and background colors to the previous behavior of … not setting them.

With update 0.10 Neovim behavior changed regarding text color and background color.

I use a color theme that does not set those and previously this worked perfectly fine. Neovim simply used the font color defined in the terminal and had a transparent background.

Now the background is #14161b and the font color is #e0e2ea. Neither of the colors is configured ANYWHERE in my whole setup. Neither in the colorscheme, nor in my terminal configuration, nor in my Neovim configuration.

Is there a sane way to revert this to the old behavior? (i.e. use the font color configured in the terminal’s configuration and use transparent background.)

  • metiulekm@sh.itjust.worksEnglish
    6·
    7 months ago

    :highlight Normal guifg=0 guibg=0 worked for me, at least when run interactively in a nvim -u NORC session.

    • bisby@lemmy.worldEnglish
      3·
      7 months ago

      From the neovim 0.10 changelog:

      ‘termguicolors’ is enabled by default when Nvim is able to determine that the host terminal emulator supports 24-bit color.

      So for me, i previously had vim.cmd.hi 'Normal ctermbg=none' as the method for disabling the background. But now, nvim was deciding to use gui colors for the terminal, and I was only setting terminal background to none.

      The options are:

      • vim.cmd.hi 'Normal ctermbg=none guibg=none' (also none out the gui bg)
      • vim.cmd.hi 'Normal bg=none' (flat unconditional bg none)
      • vim.opt.termguicolors = false (just disable the now enabled by default function to go back to terminal colors)
    • 𝘋𝘪𝘳𝘬@lemmy.mlOP
      1·
      7 months ago

      This looks fine when doing it manually, thanks. I wonder how to properly implementing this in my Lua-only setup without just wrapping it in vim.cmd.

      • metiulekm@sh.itjust.worksEnglish
        2·
        7 months ago

        I looked at material.nvim randomly, and they use vim.api.nvim_set_hl to set their colors. It seems that the equivalent of the above command is :lua vim.api.nvim_set_hl(0, "Normal", {}).

  • www-gem@lemmy.ml
    4·
    7 months ago

    This is my neovim visual config:

        -- General colors
    vim.api.nvim_set_hl( 0, "Normal", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "NormalFloat", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "NormalNC", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "LineNr", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "SignColumn", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "Folded", { bg = "#4b4b4b" } )
    vim.api.nvim_set_hl( 0, "FoldColumn", { bg = "none" } )
    vim.api.nvim_set_hl( 0, "Visual", { fg = "#000000", bg = "#de935f" } )
    vim.api.nvim_set_hl( 0, "NotifyBackground", { bg = "#000000" } )```

    -- Spell checking 
    vim.api.nvim_set_hl( 0, "SpellLocal", { fg = default } )
    vim.api.nvim_set_hl( 0, "SpellRare", { fg = default } )
    vim.api.nvim_set_hl( 0, "SpellCap", { fg = "#de935f", italic=true } )
    vim.api.nvim_set_hl( 0, "SpellBad", { fg = "#ff0000", italic=true } )
   
   -- Markdown
   vim.api.nvim_set_hl( 0, "htmlBold", { bold=true } )
   vim.api.nvim_set_hl( 0, "htmlItalic", { italic=true } )
   vim.api.nvim_set_hl( 0, "htmlStrike", { fg = "#ff0000", strikethrough=true } )

    vim.api.nvim_set_hl( 0, “Normal”, { bg = “none” } ) is probably what would work for you.

    • 𝘋𝘪𝘳𝘬@lemmy.mlOP
      1·
      7 months ago

      So I need to disable all the non-treesitter definitions first?

      Do you know if there is a way to completely disable the built-in styling?

      • www-gem@lemmy.ml
        1·
        7 months ago

        I have treesitter as well and didn’t do anything specific before adding these lines to my config. If you’re looking to change “everything” without tweaking each highlight parameter individually you may be interested in this plugin.

        • 𝘋𝘪𝘳𝘬@lemmy.mlOP
          1·
          7 months ago

          I don’t want to make Neovim transparent, though. I have an own colorschme and just don’t want the default colorscheme to be applied.

          • www-gem@lemmy.ml
            1·
            7 months ago

            Ok. If I have interpreted your post correctly you want to not use the default colors for values not defined in your theme (i.e. defaulting to transparency).

            I see two options to combine to your theme:

            • replacing any default colors using the command above
            • using the transparency plugin so any colors not defined in your theme will be transparent
            • 𝘋𝘪𝘳𝘬@lemmy.mlOP
              1·
              7 months ago

              Yeah … so stupid. Why do they force that? If it would take the already defined foreground and background colors of the terminal, fine … but those colors are just made-up nonsense.

              Your idea was great, though. I quickfixed that in my colorscheme by adding this line

              vim.api.nvim_set_hl(0, 'Normal', {})

              And so far this seems to resolve the problematic colors being set.

  • LeroyJenkins@lemmy.world
    11·
    7 months ago

    vim.opt.background = false

    vim.opt.guicfg = { background = “transparent”, foreground = “#<idiots_color_hex>”, }

    • 𝘋𝘪𝘳𝘬@lemmy.mlOP
      1·
      7 months ago

      vim.opt.background = false

      Unfortunately no.

      E5113: Error while calling lua chunk: vim/_options.lua:0: Invalid option type 'b
oolean' for 'background', should be string

      When setting to any string (a literal 'false', a hex color string with or without #, etc.) it prints

      E5113: Error while calling lua chunk: vim/_options.lua:0: E474: Invalid argument

      vim.opt.guicfg = { background = “transparent”, foreground = “#<idiots_color_hex>”, }

      Also no.

      E5113: Error while calling lua chunk: vim/_options.lua:0: Invalid option (not found): 'guicfg'