I’m considering adding more storage to my PC, and came across PCIe to M.2 adapter cards. I was wondering if performance would suffer on the adaptor card vs directly on the mobo? The M.2 slot is pretty much a PCIe x4 slot, so a a PCIe x16 should be able to drive 4 M.2 SSDs without issue right?

  • DoomBot5@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    1 year ago

    Correct. Performance shouldn’t be an issue if you confirm the following:

    • verify the 16x slot actually has 16 lanes going to it. Some motherboards only run the full lane count to the top slot.
    • verify your motherboard supports 4x/4x/4x/4x pcie bifurcation for 3-4 drives, or at least 8x/8x or 4x/4x for 2 drives. Without this feature, only 1 drive will show up regardless of how many you put in there.
    • make sure you have enough pcie lanes to support the number of cards you want. In consumer hardware pcie lanes are often shared among several devices that are plugged in.

    As an alternative to the 2nd one, you can buy very expensive pcie adapter cards that have a chip onboard, saving you from needing bifurcation support.

    • Glemek@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Thanks for this, I didn’t know about the bifurcation or total PCIe lanes at all. It looks like my mobo supports 8x/8x on the 2nd 16x slot which makes it a little less attractive than the potential of eventually jamming an additional 4 M.2 drives.

      I gotta look a bit more into the PCIe lanes though, I don’t feel like I really understand what I actually have available with my hardware.

      Edit: spelling

      • DoomBot5@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        You’re welcome. It’s a big gotcha that people aren’t aware of until they get into homelabbing.