Right now, I have around 20TB of data in redundant ZFS mirrors, so I am somewhat protected against any single drive failing. Critical data is backed up at various cloud providers, but that’s only a few gigs of all my data.

Looking at S3 pricing, It seems rather unfeasible to back up my data there or on the other “big” cloud providers, as it would cost me around $180 with AWS or half of that with backblaze.

How and where do you guys back up your data?

  • Fryboyter@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    The amount of data I backup offsite is significantly less than 20 TB. Therefore, my answer to your question will probably not help you.

    I store my offsite backups at rsync.net and in one of Hetzners Storage Boxes. For backups in general, I use Borg.

      • Fryboyter@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        However, I would not use the storage boxes as the only backup. The offer has two disadvantages.

        • The boxes are regularly unavailable for some time due to maintenance work. But these maintenance times are announced in advance.

        • Hetzner does not specify what kind of RAID is used.

        I therefore only use my box as an additional offsite backup and to swap out less important files.

  • J_C___@lemmy.place
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    The real question is how much of that data is irreplaceable. While I hoard like most of you I only off-site backup the hand full of TBs I can’t live without if there was a full system failure. It’s not the perfect solution but most of my hoarded data isn’t mission critical

    EDIT: to answer your question though I use AWS glacier storage

    • laenurd@lemmy.lemist.deOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Apart from the few gigs of really private and self-made data, most of it would probably be replacable, it’s just a matter of how much work that would be. On the other hand, I wonder how much of my media collection I would actually miss were it to get lost.

      I will look into AWS glacier, thank you.

      • billygoat@lemmy.fmhy.ml
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        My line of thinking is that radarr and sonarr are my backups. If the drives went boom then just have those two sync my library. It may take a couple weeks but I can live with that.

      • J_C___@lemmy.place
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        Sounds like we have similar setups, and knowing that I’d highly recommend investing in automating as much of your current setup as possible so you can quickly get things back up and running with little to no interaction. Backing up configurations and library metadata might prove to be pretty useful in resurrecting a dead server.

        Also rclone is going to be your best friend if you don’t already have that setup

      • Arn_Thor@lemmy.fmhy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        The egress fees from glacier are astronomical. So if you ever need them you might just decide it’s worth re-downloading. Last I checked Wasabi seemed a better option, but higher priced per month of course.

  • jmshrv@feddit.uk
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I use Scaleway Glacier since I could actually afford to pull the data out, unlike S3.

  • Lemmchen@feddit.de
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    It’s not really enabled right now, but my offsite backup is a combination of a Raspberry Pi 4B, a QNAP TL-D800C and a Tasmota WiFi power plug at a family member’s place.

    I SSH in to the always-on Pi over a VPN connection, send a command to the Tasmota to turn on the QNAP disk shelf, do a zfs send and once it finishes it shuts down the disk shelf again.

  • Moosemouse@lemmy.ml
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    You could look into AWS Glacier or S3 Deep Storage tier. If you have 20TB stored that’s about $20/month(YMMV) which isn’t wonderful but that’s a lot of data so it’s understandable.

    Being a cheapskate, if I can get something back or it’s not crucial it’s on a RAID array with snapshots, everything else is either encrypted Duplicati backups to Google Drive (Windows) or encrypted borg backups to Borgbase(Linux)

    Borgbase is very reasonably priced and if you have a large storage space in GDrive due to having one of their other services it’s a good use of it.

  • timeisart@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I just have a Synology NAS running a Hyper Backup task to an external USB HDD that I physically drive to my parents house whenever I go there, at which point the new data gets copied to another external drive I keep there using rsync.

    Not the most ideal solution but it works for now. Eventually it would be nice to get another NAS to keep at my parents house and have nightly backups going over the internet.

  • jgoerzen@lemmy.ml
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    How about good old offsite HDDs, tapes, etc. I guess it depends on the target. If it’s family photos, you probably want something like this – after all, if you get hit by a bus and stop paying the hosting bill for a couple of months, all that stuff could be gone.

    Variations on the scheme include rotating media into safe deposit boxes at a bank, etc.

  • ddnomad@infosec.pub
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    I used to store a bunch of hard drives with ZFS snapshots of my stuff in the garage. Not ideal, but better than nothing, and it’s technically a separate building lol

    I only have roughly 5TB of data though.

    Definitely looking to improve the situation, cause at the moment I have no offsite backups at all :/

    • Moosemouse@lemmy.ml
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      It would be marginally risky, but considering how many people have large storage arrays having a “mutual backup compact” between two folks where each can run backups to the others array would help get you an affordable offsite backup for catastrophes.

      I see a bunch of people with 10TB of data and 30TB arrays and if two of them got together they would both be reasonably safe from a total array failure.

      • ddnomad@infosec.pub
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        This does sound interesting! Would need some tooling to lay my paranoia to rest though, and some trust towards the other person.

        • Moosemouse@lemmy.ml
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I can imagine a containerized service that only runs, say, ssh which only runs a forcedcommand, like https://borgbackup.readthedocs.io/en/stable/usage/serve.html

          And set up the container with the storage-opt option to limit space usage. It would make it harder to misuse the space or cpu, or break out into the hosting server.

          You could go one step further and set up something like a tailscale/headscale network and only allow access over that, and limit the acls on the tailnet to only the ssh port. That should shield it from the Internet at large and also apple am absolute minimum of access to the other side.

          I wonder if you could run the tailscale client within the container? Having it all together would make it actually usable.

          I’m also looking at some of the distributed file systems out there, if one supports “m of n” connections to get the data, you could possibly use that to have the encrypted backups stored on multiple machines at once with more resilience.

          • ddnomad@infosec.pub
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Tbh the idea does sound interesting, especially if there’s a way to do Shamir’s secret sharing on top of the encrypted snapshot or something. Cause I’m not too worried with exposing my stuff to the internet, as I at least partially do that for a living, but rather make sure I do not existentially send all my family’s documents in plaintext to some stranger on the internet.

  • Nogami@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    18
    ·
    edit-2
    1 year ago

    Running 2 redundant unRAID systems which mirror ZFS snapshots between systems. The main system(150TB) is the one that has all of the SMB connections to the rest of the network and allows modifications to the filesystem (with a valid login). The backup system has no public shares and exists only to replicate the main system and is just large enough to store personal documents and such.

    For critical data (read: personal documents, family photos, etc), in addition to the backup server, I also keep an 8TB drive in a safe deposit box, and I bring it home about every 6 months to rsync all of the latest updates to it from the backup server.

    For media (TV shows, Movies, music), it’s only “protected” against failure with unRAID’s array system with dual parity. I don’t bother with backups at all, because it’s very large, and all easily replaceable.