Or would the tolerances needed in the hinged mirror make the whole thing unusable?
I was looking at modern “smart telescopes” recently and noticed some are sideways and wondered if that would be possible for a normal hobby Newtonian telescope.
Possible upsides:
- no tripod needed for use
- mirror is light so smaller motors can be used for movement
Possible downsides:
- maybe mirror flatness?
EDIT/UPDATE: so i tryed it with a 75mm first surface mirror, it kinda worked, at least better than a normal mirror, but i wasnt able to get it as sharply focused as i like. I suspect the mirrior i use has micro ripples because its just 2mm thick and doesent look like its seen a polishen process…guess thats how far a budget of 25bucks gets ya
Technically getting one surface flat is easy. Hell, it’s one of the first thing you learn in measurement science (three plates and perfect smoothness). However a mirror isn’t just about being flat, it is also about light reflection. And that makes it more interesting. In a perfect vacuum, you could do a silver mirror without the glass and have it be perfectly flat and not worry about oxidation. But the reality of making that mirror stay perfectly reflective means that glass or similar is usually involved. And then you move away from the perfect flatness problem (relatively easy) to perfectly parallel planes (significantly harder).
Furthermore, keeping a plane or surface perfectly.flat after manufacture requires uniform temperatures, which are rarely present in amateur telescopes.
The end result is almost always the introduction of additional error.