I think as a turn-key solution, the prebuilt enclosures are fine. I have a two-bay Synology that works well. If you’ve already got components though, DIY is probably going to give you a lot more granular control. I’m planning on building out a home server rack including a TrueNAS VM or something similar.

Syno 920+ for me

Understand that this is a rabbit hole where you’ll hear a million opinions. If you’re just starting out, I’d recommend keeping it simple. It’s been a while since I looked at what’s new, but I’d look at truenas scale or unraid first.

I personally use truenas core (based on freebsd) but truenas scale (based on debian) opens up more options like docker that might be useful in the future.

I recommend sticking to hardware you already own until you run into something that you can’t do. Then you’ll have a better idea of what to look for and how everything works.

I replaced an old prebuilt Windows Home Server with a custom built server running unraid about…7 years ago. unraid has been rock solid for me. Great product. Very scalable for the home user.

Highly recommend unraid and it’s well worth the one time license fee.

Depends on how you intend to maintain it. I started out with a Synology NAS. When that started to give out the ghost I built own so that I could have better control over the software and hardware. It’s now a NAS of Theseus - all the parts (even the OS) have been replaced over time, but it’s still the same “unit”.

The hardest part was deciding on a case. I started with a small form factor as a preference. Nowadays I just pick what gives me good airflow and ease in replacing parts.

Adding my 2c - I think it depends on if you want something that just works out of the box, or if you want to tinker and play with a DIY solution. I have a Synology DS220+ that just works, is easy to manage, has loads of apps etc. I also have a Raspberry Pi with Openmediavault installed and 3 SSDs attached which required a bit of setup, is more complex to get things working, also has apps (plugins) but is more of a project.

I used the cpu/motherboard/ram/psu from a desktop I’d since upgraded, slapped it into a 4u rackmount case I got cheap on Ebay (it looks awful - I think it was previously used in a lab - but it’s solid af), bought a nice big cooler and some noctua fans so it’d run quiet, added an HBA card, 4x shucked 14tb drives and a coupla 1tb m.2s, slapped Unraid on it, and was up and running with an awesome nas for really not that much money. Totally worth it, that thing is awesome.

I will admit it doesn’t look as swanky as a synology, but it was far cheaper, is a lot more capable of non-nas stuff, and every part is standard and upgradeable.

I’ve built multiple DIY NAS solutions, from a simple ARM NanoPi M4V2 in a wood enclosure to a high performance systems for small companies with TrueNAS Scale. Frankly I don’t see much reason to go with a pre-build if you’ve the time and skills.

Definitely try re-using what you have already. Just keep in mind that a NAS usually runs 24/7 and old gaming PC parts are usually quite power hungry, so it might cost a lot in terms of electricity.

I am in the same situation, my concern about going DIY is the lack of ECC ram, but I don’t know how much this is important.

I picked up an old Dell Optiplex tower and slapped 4 cheap 4 TB drives in it. Setup as RAID 5 I got 12 TB of “redundant” storage for cheap! Perfect spot to keep all the p0rn torrents.

But I used OpenMediaVault for that deployment. It’s been OK… but I kinda feel that I am missing out on some of the more active developments of other distributions.

Despite that, I would absolutely suggest grabbing an old office computer and throwing some drives into it for a home NAS.

Personally, I use a “scratch built” machine to act as a file server/media server. Someone was going to recycle it at the office, so I added some hard drives and put it in a larger case.

It really comes down to two things in my mind: what can you afford and how deep do you want to follow the rabbit hole?

If you want something quick and easy, sure go for the premade. Nothing wrong with that.

If you want to use it as a learning tool, and add other services, then I think a home spun server is the way to go.

Just my 2 cents.

I had considered running a DIY for years, and eventually just caved and bought a Synology 1522+ NAS. It lets me run my Plex server and Matrix server, and it just handles all the config and updates for me easily.

The decision was that I wanted to backup my hobbies, not have backup BE my hobby.

@[email protected] Really depends on your budget and how much you want to tinker. I’ve got multiple synology’s (1821+ 1515+), along with a decently large truenas server running on a 36bay supermicro. And some windows boxes running drivepool.

The synologys are great NAS first devices, rock stable, I do some light Docker stuff (homeassistant, scrypted, etc.) and use them as NVRs but they have anemic CPUs. I spend very little time each month maintaining them and getting them to work. They’re just set and forget.

The truenas SM box is much more powerful CPU/RAM and storage wise but I spend probably 3 times more hours getting stuff stable, updating, managing performance, and tinkering.

Windows stuff is set and forget but requires much more time and frequent patching.

I usually DIY and repurpose my old PC into a server when I upgrade. My current NAS is running on a ~10 year old i5 2500k in a (large) mid tower case packed with drives. It runs Unraid and also hosts a bunch of Docker containers for Plex, etc.

It’s definitely more work to set up than a pre-built and also more power hungry, so that’s the trade-off for the additional flexibility and lower cost of entry (at least in my case since it was mostly parts I already had). I am running low on expansion room since the 6 HDDs and 2 SSDs have about maxed out my case, but you’ll run into that same problem with pre-builts depending on how you size it.