You do need a separate EFI, even though linux finds EFI, otherwise windows update trashes it randomly and why the meme we see here exists, with separate EFI windows doesn’t know about it. You can shutdown windows mid update and boot linux, then reboot back to windows and update will continue. Siloed System
Not during typically reboots, but when some windows update or autofile repair happens it thinks it is the only OS on that partition and does what it likes.
Yes. When you install Linux it will auto detect the Windows EFI partition and put boot stuff there by default, but then windows comes along and will randomly trash that setup. So during install don’t go with the suggested option, instead use the partitioning tool to creat another small EFI boot partition elswhere on disk, leaving Windows EFI and OS paetitions as is. Also create your root and home partition(s).
Install to those partitions, then Linux should prompt for Probe Foreign OS and add a chainloader entry to your grub menu. This entry, when selected, points grub to windows EFI partition ID and hands off the boot process to Windows. Windows is unaware it has been chainloaded.
As long as you set BIOS to load directly from the LINUX EFI entry then you will boot to Grub with Linux/Windows Dual option…But technically it is not a true Dual Boot, it is a sequential boot I guess.
I have had this for 7 years on same install and boot between W10 and Linux daily. Windows has never touched my Linux EFI.
For something like OpenSUSE you go into YAST2-GUI and click the probe foreign OS and then it asks you if you want Windows or Linux as the default boot. But to do it manually you add a menu entry to /boot/grub2/custom.cfg. or in /etc/grub.d/40_custom. After editing this you will have to run grub2-mkconfig -o /boot/grub2/grub.cfg which will compile all the grub info into /etc/grub2/grub.cfg
I believe the custom.cfg entries end up after the 40_custom entries that the OS may have included.
There is a persistent method entry if you did want to edit the /etc/grub2/grub.cfg directly, but probably not advised.
Here is my entry for Windows boot partition and location of MS boot. Also below that is a UEFI entry for geting back to the BIOS, not relevent to this topic, but just so you see how the menu entries are defined. In my system these are at the end of all the other Linux entries.
I responded how to via another comment, but wanted to mention that you may have a chainload to Windows already with your dual boot, but the main point was using two EFI partitions and chainloading to the other one, so Windows isn’t ever in charge of files in your linux boot partition
Could you give me more detail for step 3?
Don’t even have to do that. Install windows first, then install Linux with refind bootloader on preferably a separate disk. Done
Did exactly that.
I installed arch so that didn’t happen.
Not how it works
You do need a separate EFI, even though linux finds EFI, otherwise windows update trashes it randomly and why the meme we see here exists, with separate EFI windows doesn’t know about it. You can shutdown windows mid update and boot linux, then reboot back to windows and update will continue. Siloed System
That’s literally what I did yesterday with my method. It works, Windows has never trashed it
It will, thats why that meme exists.
Not during typically reboots, but when some windows update or autofile repair happens it thinks it is the only OS on that partition and does what it likes.
Nope, ran it like this for over 5 years. Definitely rebooted during updates / did some crap
Then you have been lucky, because most peoples experience with grub EFI on Windows partition is windows will eventually scrub it.
I’m not using Grub
Makes no difference of what bootloader, just that windows thimks it owns that partition
Yes. When you install Linux it will auto detect the Windows EFI partition and put boot stuff there by default, but then windows comes along and will randomly trash that setup. So during install don’t go with the suggested option, instead use the partitioning tool to creat another small EFI boot partition elswhere on disk, leaving Windows EFI and OS paetitions as is. Also create your root and home partition(s). Install to those partitions, then Linux should prompt for Probe Foreign OS and add a chainloader entry to your grub menu. This entry, when selected, points grub to windows EFI partition ID and hands off the boot process to Windows. Windows is unaware it has been chainloaded. As long as you set BIOS to load directly from the LINUX EFI entry then you will boot to Grub with Linux/Windows Dual option…But technically it is not a true Dual Boot, it is a sequential boot I guess. I have had this for 7 years on same install and boot between W10 and Linux daily. Windows has never touched my Linux EFI.
How to add chainloader entry to grub?
For something like OpenSUSE you go into YAST2-GUI and click the probe foreign OS and then it asks you if you want Windows or Linux as the default boot. But to do it manually you add a menu entry to /boot/grub2/custom.cfg. or in /etc/grub.d/40_custom. After editing this you will have to run grub2-mkconfig -o /boot/grub2/grub.cfg which will compile all the grub info into /etc/grub2/grub.cfg I believe the custom.cfg entries end up after the 40_custom entries that the OS may have included. There is a persistent method entry if you did want to edit the /etc/grub2/grub.cfg directly, but probably not advised.
Here is my entry for Windows boot partition and location of MS boot. Also below that is a UEFI entry for geting back to the BIOS, not relevent to this topic, but just so you see how the menu entries are defined. In my system these are at the end of all the other Linux entries.
### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Boot Manager (on /dev/nvme0n1p2)' --class windows --class os $menuentry_id_option 'osprober-efi-4E48-193F' { insmod part_gpt insmod fat search --no-floppy --fs-uuid --set=root 4E48-193F chainloader /efi/Microsoft/Boot/bootmgfw.efi } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' { fwsetup }I responded how to via another comment, but wanted to mention that you may have a chainload to Windows already with your dual boot, but the main point was using two EFI partitions and chainloading to the other one, so Windows isn’t ever in charge of files in your linux boot partition