Hey, I just repaired one of my earbuds, which required me to open up the casing. Now the casing opens up way to easily at the seam, therefore I want to reseal it.

Can someone give me tips on what glue to use? I want the glue to be able to re-liquefy under a bit of heat treatment, as I may need to open it up again in the future, and it should be water-proof. The material is some kind of hard plastic.

Also some application tips and tricks would be nice, as the area is very very narrow and I don’t have the steadiest of hands.

  • FrankLaskey@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    ·
    9 months ago

    Re-liquefying under heat treatment I don’t know but if you can forego that requirement, I would recommend E6000. If you do use it make sure to apply and allow to dry/cure in a well-ventilated area. It’s a great adhesive but has its fair share of carcinogens you don’t want to be breathing in…

  • SheeEttin@programming.dev
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 months ago

    I’m not sure there’s a good adhesive that will accomplish this. What’s the shape of the earbud? Could a piece of heatshrink on the outside accomplish it?

    • the_beber@lemm.eeOP
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      Hmm… I may be able to similarly get away with a slim strip of electrical tape. Won‘t look good, but I don‘t really care.

  • remotelove
    link
    fedilink
    arrow-up
    2
    ·
    9 months ago

    A glue used for phones is probably good for you, but it’s hard to say if you can soften these with heat: https://www.screenfixed.com.au/top-14-best-mobile-repair-glue/

    See if the design will allow for some other way to secure it, like using a small screw as an example. This will take some creativity and caution, but may be a better option if you think you will need to repair them again. (Adhesives have a tendency to not allow for future repairs.)