The pieces shown in these photos are the metal parts. The bit that was most likely to break up was the cylindrical carbon fibre hull, and there are no pieces of that in evidence here. The acrylic window is also missing from the front piece.
OceanGate CEO Stockton Rush says the company had been evaluating the potential of using a carbon fiber composite hull since 2010, primarily because it permits creation of a pressure vessel that is naturally buoyant and, therefore, would enable OceanGate to forgo the use — and the significant expense — of syntactic foam on its exterior. So, for Cyclops 2 OceanGate decided to avoid the metallic hull altogether and began a search for a manufacturer that could help it develop a composite hull.
Once again the motive for the choice of carbon fibre seems to have been its relative cheapness.
Consider this thing displaces about 5 m^3 of water, you’d want it to be buoyant after dropping the ballast, so the entire vehicle needs to weigh in at under 5000 kg. You’ve got 400kg of humans, and probably another 600kg of batteries and other equipment.
That means you need your pressure vessel to be under 4000kg. To fashion a 151cm OD cylinder, that was 252cm long, with spherical end caps out of titanium that was 10cm thick you’d need (if my math is correct) a weight of 7,853 kg. That would sink to the bottom of the ocean floor, which is decidedly unattractive.
To be fair, I’m sure each trip out there was very expensive to run. They would have costs for the boat, the fuel, the maintenance, and a full crew with specialist skills.
I’m just reading and watching news interviews with experts so I’m just armchairing here, but It looks like the parts that survived are titanium bits that is what certified submersibles also use, except they usually is spherical in shape. I imagine the tube bit that’s made with carbon fibre where they housed the passengers is the bit that is so torn up that it’s unrecoverable
Also little cleaner than what I was expecting granted it’s probably been cleaned up from wild life and the recovery crew but still I was expecting a little bit of blood like I’m not even trying to be a gore loving weirdo I just know that humans are basically balloons full of blood and implosions are really violent especially at that depth this sub went to
Keep in mind that the balloon of blood in this case is being crushed by water. Any blood wouldn’t have hit the walls as much as diluted in many gallons of water. Without a chance to deposit and dry, blood doesn’t really “paint” things.
Well, they moved it through 3500 meters of water in the process of retrieving it. That’s gonna be the equivalent of a full wash cycle, albeit in seawater.
Ocean would’ve mixed with blood and thinned it out a ton. So at best, maybe a slight misting of pink. But it’s been down there enough days for a lot of that to get washed away, anyway. Never exactly had a chance to dry.
Now I’m generally curious now that can see the it. That thing is pretty much like a crushed soda can. What really happens to the bodies tho? At depth, The tube goes poof and implodes in milliseconds but do the bodies implode too or they just crushed in the pop can.
It wouldn’t really crush like a soda can. That’s what a steel submarine would do, but this was made of carbon fibre which would shatter into many pieces while the titanium ends just fell off.
That depends on what happened. If the whole structure collapsed instantly, they are probably crushed by debris and a shockwave. But if there was a “leak” and the pressure equalized without complete destruction maybe the lungs are compressed, ribs broken and eardrums torn. All depending on the speed of equalization. Maybe also bones break (because water is compressible) but the bag of meat and blood should remain intact. So finding a body would help to reconstruct what happened. But I doubt they will find one before hungry animals do.
They would’ve been instantaneously turned to ash. The vessel temperature at the time of breach would be about 5000 celsius. About the temperature of the sun. Whatever was left would be oozed out the cracks like play-doh
The bodies can’t implode; the lungs can/will collapse but that is pretty much the least of the issues. Even if the bodies aren’t pulverized by the collapsing sub, the water will hit like a hammer traveling at supersonic speeds. So probably a combination of rendering into mincemeat, dismemberment, and scattering of the human remains would result from such an implosion. A destruction on par with being hit by a bomb at ground zero.
I don’t know if that kind of temperature lasts more than microseconds, so that might not be enough time for much combustion to happen.
In any case, the forces, IIRC, from a 300 atm pressure differential would mash the people to goo in the blink of an eye. Like being inside an exploding bomb. Except exploding in. They’re fish food.
EDIT: There are reports that the Coast Guard recovered “presumed human remains”.
Ever see sharks or any sea life really, go at chum, or a whale carcass? Whatever may or may not have been left of them got eaten up by whatever sea creatures happened to be passing by (even ash would probably go through whatever filter feeders).
And the circle of life continues.
I’m no expert but I think we’re looking at parts of the vehicle which were outside the pressure hull. Those parts would not have been subjected to such extreme forces when the hull failed.
Most bits of a DSV are actually outside of the pressure hull, just look at the designs of Trieste or Limiting Factor. This is to maximize the space available to human passengers inside the relatively small (and very expensive to construct) hull.
honestly, it’s a lot more intact than I thought
The pieces shown in these photos are the metal parts. The bit that was most likely to break up was the cylindrical carbon fibre hull, and there are no pieces of that in evidence here. The acrylic window is also missing from the front piece.
This diagram shows that the white bits are a glass fiber shell
https://www.compositesworld.com/articles/composite-submersibles-under-pressure-in-deep-deep-waters
It’s not part of the pressurized system so there’s really nothing to rip it to pieces. Definitely no sign of the carbon fiber parts.
Once again the motive for the choice of carbon fibre seems to have been its relative cheapness.
Probably weight too.
Consider this thing displaces about 5 m^3 of water, you’d want it to be buoyant after dropping the ballast, so the entire vehicle needs to weigh in at under 5000 kg. You’ve got 400kg of humans, and probably another 600kg of batteries and other equipment.
That means you need your pressure vessel to be under 4000kg. To fashion a 151cm OD cylinder, that was 252cm long, with spherical end caps out of titanium that was 10cm thick you’d need (if my math is correct) a weight of 7,853 kg. That would sink to the bottom of the ocean floor, which is decidedly unattractive.
And he still charged $250k…
To be fair, I’m sure each trip out there was very expensive to run. They would have costs for the boat, the fuel, the maintenance, and a full crew with specialist skills.
When carbon fiber is the cheap option you know things are getting crazy.
I’m betting the carbon fiber part of the hull was completely pulverized. Nothing left but fragments.
I’m just reading and watching news interviews with experts so I’m just armchairing here, but It looks like the parts that survived are titanium bits that is what certified submersibles also use, except they usually is spherical in shape. I imagine the tube bit that’s made with carbon fibre where they housed the passengers is the bit that is so torn up that it’s unrecoverable
Also little cleaner than what I was expecting granted it’s probably been cleaned up from wild life and the recovery crew but still I was expecting a little bit of blood like I’m not even trying to be a gore loving weirdo I just know that humans are basically balloons full of blood and implosions are really violent especially at that depth this sub went to
Keep in mind that the balloon of blood in this case is being crushed by water. Any blood wouldn’t have hit the walls as much as diluted in many gallons of water. Without a chance to deposit and dry, blood doesn’t really “paint” things.
Well, they moved it through 3500 meters of water in the process of retrieving it. That’s gonna be the equivalent of a full wash cycle, albeit in seawater.
Ocean would’ve mixed with blood and thinned it out a ton. So at best, maybe a slight misting of pink. But it’s been down there enough days for a lot of that to get washed away, anyway. Never exactly had a chance to dry.
Now I’m generally curious now that can see the it. That thing is pretty much like a crushed soda can. What really happens to the bodies tho? At depth, The tube goes poof and implodes in milliseconds but do the bodies implode too or they just crushed in the pop can.
It wouldn’t really crush like a soda can. That’s what a steel submarine would do, but this was made of carbon fibre which would shatter into many pieces while the titanium ends just fell off.
That depends on what happened. If the whole structure collapsed instantly, they are probably crushed by debris and a shockwave. But if there was a “leak” and the pressure equalized without complete destruction maybe the lungs are compressed, ribs broken and eardrums torn. All depending on the speed of equalization. Maybe also bones break (because water is compressible) but the bag of meat and blood should remain intact. So finding a body would help to reconstruct what happened. But I doubt they will find one before hungry animals do.
Not possible for anything but immediate implosion at those depths. Even a microscopic leak would instantly turn into a beach.
I love the beach!
Why? What should lead to that?
They would’ve been instantaneously turned to ash. The vessel temperature at the time of breach would be about 5000 celsius. About the temperature of the sun. Whatever was left would be oozed out the cracks like play-doh
Praying Mantis Shrimp agrees with this comment.
The bodies can’t implode; the lungs can/will collapse but that is pretty much the least of the issues. Even if the bodies aren’t pulverized by the collapsing sub, the water will hit like a hammer traveling at supersonic speeds. So probably a combination of rendering into mincemeat, dismemberment, and scattering of the human remains would result from such an implosion. A destruction on par with being hit by a bomb at ground zero.
I read that from the compression the air ignites so they probably burnt to ashes in milliseconds.
But I might got it wrong.
I don’t know if that kind of temperature lasts more than microseconds, so that might not be enough time for much combustion to happen.
In any case, the forces, IIRC, from a 300 atm pressure differential would mash the people to goo in the blink of an eye. Like being inside an exploding bomb. Except exploding in. They’re fish food.
EDIT: There are reports that the Coast Guard recovered “presumed human remains”.
https://www.theguardian.com/world/2023/jun/28/titan-sub-debris-implosion-wreckage-oceangate
What could possibly be left of them after that implosion?
Ever see sharks or any sea life really, go at chum, or a whale carcass? Whatever may or may not have been left of them got eaten up by whatever sea creatures happened to be passing by (even ash would probably go through whatever filter feeders).
And the circle of life continues.
I’m no expert but I think we’re looking at parts of the vehicle which were outside the pressure hull. Those parts would not have been subjected to such extreme forces when the hull failed.
Most bits of a DSV are actually outside of the pressure hull, just look at the designs of Trieste or Limiting Factor. This is to maximize the space available to human passengers inside the relatively small (and very expensive to construct) hull.